Accueil / Marbre et pierre naturelle / Marble & Stone Wall Cladding
Natural Stone / Cladding
A wall in real stone is the most permanent statement a building makes — a marble feature wall in a lobby, a stone facade on the street. We supply contract stone wall cladding and facades: interior feature walls, exterior facades, large-format slabs and stone cladding panels in quarry-direct Turkish marble, limestone, travertine and sandstone, fixed and finished to project and shipped worldwide from Istanbul.
Interior feature walls
Exterior facades
Large-format slabs
Stone cladding panels
Marble, limestone & travertine
Ventilated facades
Polished, honed & split-face
Demander un devis
Configure Cladding →
Large-format · ventilated facade
Quarry
Direct Stone
FOB / CIF
Livraison partout dans le monde
Correction
Panels & Systems
4–8 wk
Temps de réalisation des projets
Vue d'ensemble
A clad wall is the largest single gesture a stone can make. A marble feature wall behind a reception desk, a full-height stone cladding in a lift lobby, or a stone facade on a building’s street elevation reads as solidity and permanence in a way paint, tile or a manufactured panel never can. We supply this as contract stone wall cladding and facade material, in quarry-direct Turkish marble and natural stone, cut and fixed for the scale and the exposure of a hospitality building.
The cladding is cut from the same Turkish stone we supply across a project, so a property’s feature walls and facades coordinate with its floors, counters and bathrooms. We supply it two ways: as large-format slabs for a seamless, modern feature wall, and as stone cladding panels — thinner, fixed pieces, including split-face and veneer — for facades and textured walls. Each is cut, finished and prepared for either adhesive fixing or a mechanical, ventilated facade system, depending on the wall and the height.
This is cladding for projects, not a builders’ merchant. Material is shade-matched across an elevation so a large wall reads as one stone, calibrated for flat, safe fixing, and detailed with the fixings, corners and reveals a clad wall needs. Crated to survive international transit and made to project in Istanbul, a stone wall from us is engineered to stay sound and good-looking for the life of the building.
Stone Cladding — At a Glance
Demande
Interior walls & exterior facades
Stone
Marble, limestone, travertine, sandstone
Formats
Large-format slabs & panels
Texture
Smooth, split-face, ledgestone
Fixing
Adhesive & mechanical / ventilated
Terminer
Polished, honed, brushed, split-face
Exterior
Facades & ventilated systems
Tiling
Small-format wall tiles routed to tiling
Made to
Project, elevation-matched
Comment nous travaillons
01
Commerce et contrat uniquement
Nous travaillons avec des hôtels, des promoteurs immobiliers, des studios d’intérieur et des équipes d’approvisionnement — et non avec le public.
02
Confectionné selon votre projet
Chaque pièce est conçue selon vos dessins, vos finitions, vos caractéristiques d’étanchéité et vos quantités. Rien de prêt.
03
Prix selon le projet
Pas de liste de prix ni de boutique en ligne — chaque projet est facturé selon ses caractéristiques, directement de notre usine.
04
Livré partout dans le monde
Nous emballons, expédions et installons les produits sur site dans plus de 40 pays, selon un calendrier unique ou en plusieurs phases.
Why Stone Cladding
Cladding a wall in real stone is a decision about how a building looks and how long it lasts. For a hotel, a stone feature wall or facade signals quality and permanence the moment it is seen, and unlike a painted or composite surface it does not date, fade or need re-coating — it weathers into character. The case for stone over the cheaper cladding materials rests on impression, durability, coordination and the freedom of format and texture that only natural stone gives.
A stone wall or facade reads as solidity and quality instantly, and keeps doing so for decades — the most lasting statement a building’s design can make.
Natural stone ages gracefully and needs no re-coating or replacement, unlike painted render, timber or composite cladding that fades and dates.
Cut from the same stone as the floors, counters and bathrooms, the feature walls and facades tie the whole property together as one material.
From seamless large-format slabs to split-face and ledgestone panels, stone offers a range of look and texture no single manufactured product matches.
The same stone clads a lobby feature wall and a street facade, letting a building carry one material from the outside in.
Supplied for adhesive fixing or a mechanical, ventilated facade system, so the cladding is sound and safe at the height and exposure of the wall.
The Build · Interactive
Cladding is a set of choices — application, stone, format and finish. Select a tab to see what we supply.
Demande
Stone
Format & Fixing
Terminer
From interior feature walls and lobby and reception backdrops to exterior facades, lift and column surrounds and garden or boundary walls — each clad in the stone, format and fixing that suits the wall, the height and the exposure.
Options
Interior feature walls
Exterior facades
Lobby & reception backdrops
Lift & column surrounds
Garden & boundary walls
The stone itself — marble for a polished feature wall, limestone and sandstone for a soft, natural facade, travertine for warm texture, and slate or granite for a darker, harder-wearing exterior. All quarried in Turkey and supplied direct.
Explore the stone library →
Options
Marble (feature walls)
Limestone & sandstone
Travertine (warm texture)
Slate & granite
How the stone is cut and held — large-format slabs for a seamless wall, thinner cladding panels and tiles for facades, and split-face or ledgestone for texture, fixed with adhesive on lower interior walls or a mechanical, ventilated facade system at height.
Options
Large-format slabs
Thin cladding panels & tiles
Split-face & ledgestone
Adhesive & mechanical fixing
The surface — a polished finish for a reflective marble feature wall, a honed ou brushed matt for a contemporary facade, or a split-face textured finish for a rugged, three-dimensional stone wall, all sealed for the exposure.
Options
Polished (reflective)
Honed & brushed (matt)
Split-face (textured)
Sealed for exposure
Demande
Inside a hotel, a clad stone wall is one of the strongest design moves available. Interior wall cladding in marble — behind a reception desk, in a lift lobby, framing a fireplace or running full-height in a feature stair — gives a space a sense of arrival and permanence that no paint or wallpaper achieves. Large-format slabs are the usual choice here, book-matched so the veining mirrors across a joint for a dramatic, symmetrical feature, and run floor-to-ceiling for a seamless wall of stone. Lift surrounds, columns and reception backdrops are natural places for a marble feature.
For interior walls we supply both polished large-format slabs for a sleek feature and textured stone cladding panels for a more tactile, natural look. Note the boundary with our tiling: this page covers large-format slab cladding and fixed stone panels for a feature wall; the small-format calibrated wall tiles and mosaics used to tile a bathroom or a kitchen wall are a separate product on our marble floor and wall tiles page. We advise which suits a given wall — large-format cladding for a feature, calibrated tiles for a tiled room.
Demande
On the outside of a building, a stone facade is a statement of permanence and quality that lasts the life of the structure. Exterior wall cladding et stone facades in durable natural stone give a hotel a solid, high-end street presence, and unlike render, timber or composite they do not fade, warp or need re-coating. We supply exterior stone cladding for buildings — full elevations, entrances, plinths and feature panels — in stones selected for weathering and exposure, shade-matched across the elevation so the facade reads as one material.
For facades, and for any cladding at height, we supply the stone for a mechanical, ventilated facade system — panels fixed back to a frame with a cavity behind — which is the sound, modern way to clad an exterior, rather than relying on adhesive alone. We detail the fixings, corners, reveals and copings a facade needs, and supply limestone, sandstone, travertine and granite for exterior work, with marble reserved for sheltered entrances and feature panels where it is protected from the worst of the weather. Garden, boundary and courtyard walls are clad in the same stones for a coordinated exterior.
Formats
Large-format slab cladding gives a feature wall the fewest joints and a calm, seamless, contemporary look, book-matched so veining mirrors across a joint. Cut to a calibrated thickness for safe fixing, slabs are the premium choice for interior feature walls and sheltered entrances.
Thinner stone cladding panels and tiles — flat, fixed pieces in a modular size — are lighter and faster to fix across a large facade or wall, and suit a mechanical, ventilated system. Distinct from floor tiling, these are cladding pieces detailed for vertical fixing.
Split-face and ledgestone panels give a rugged, three-dimensional, layered-stone texture for a characterful feature wall or a natural facade, supplied as interlocking strips or panels for a fast, textured finish in stone.
Matching external and internal corner pieces, copings, sills, reveals and trims cut from the same stone, so a clad wall or facade is complete and finished at every edge rather than left with an exposed substrate.
Fixing
How cladding is held to the wall depends on the height and the exposure, and we supply the stone prepared for the right method. On lower interior walls, stone can be adhesive-fixed directly to a sound substrate with the correct stone adhesives, the simplest approach for a feature wall within reach. For facades, full-height interior walls and any cladding at height, the stone is supplied for a mechanical, ventilated facade system — panels held back to a support frame with concealed anchors and a drained, ventilated cavity behind — which is the sound, modern and safe way to clad an exterior.
We cut every panel to a calibrated thickness suited to its fixing, kerf or anchor the panels where a mechanical system requires it, and supply the corners, copings and trims to complete the detail. The fixing itself is carried out on site by the project’s installer to the facade engineer’s design and the local code; we provide the stone, the preparation and the setting-out, shade-matched across the elevation, so the installed wall is both sound and reads as one material.
Stone & Colour
Different walls call for different stones, and we supply the full natural range. Marbre is the choice for a polished, luxurious interior feature wall, book-matched for drama. Limestone et sandstone give a soft, natural, even-toned facade that suits resort and Mediterranean architecture, and weather beautifully outdoors. Slate et granite give a darker, harder-wearing surface for exposed exteriors, and the warm, textured look of travertine cladding is covered in depth on our travertine page, which carries travertine walls, floors and paving as one.
Colour and texture are led by the design and the elevation: pale limestones and white marbles for a light, calm wall; warm travertine and sandstone for an organic facade; and darker slates and veined marbles for a dramatic feature. Stone is shade-matched across an elevation so a large wall reads as one material, and bolder slabs are laid out so the veining falls correctly across a feature. The full Turkish range, including limestone and the other facade stones, is set out in our stone library.
Choosing
Most cladding searches turn up a long list of materials — PVC, metal, timber, WPC, cement board and composite panels — and each has its place on a budget or a back elevation. What none of them offers is the look and longevity of real stone. Stone cladding costs more than a plastic or composite panel, but it does not fade, warp, discolour or need replacing the way manufactured cladding does, and on the surfaces a hotel wants to impress — the entrance, the lobby, the street facade — the difference between genuine stone and a printed or moulded imitation is immediately visible.
Our position is simple: we supply natural stone, the permanent, premium option, and we are honest that for a hidden or strictly budget-driven wall a manufactured panel may be the practical choice. Where a property wants the prestige and durability of real stone on the walls that matter, we provide it — coordinated with the floors, counters and bathrooms from the same Turkish quarries, so the building reads as one material inside and out, rather than a patchwork of separately specified surfaces.
Across the Project
Cladding is one surface in a wider stone scheme, and as a single supplier we route each surface to the right product and the right page. This page is the home of large-format slab cladding and fixed stone panels — the feature walls and facades. The small-format calibrated wall and floor tiles, shower tiles and mosaics that tile a room are on our marble floor and wall tiles page, and the warm, textured cladding, floors and paving done in travertine are covered there.
The solid working and furnishing surfaces have their own homes too: marble countertops and kitchen or bar counters, vanity tops and bathroom stone, quartz and engineered stone, and stone-topped Tables en marbre. All are quarried and cut in Turkey from coordinated stones, so a hotel can carry one material story from the facade and feature walls through to the floors, counters and furniture. The full Marbre et pierre naturelle range ties the surfaces together.
Project Capability
Supplying cladding for a building is an elevation-by-elevation exercise, and our supply is set up for it. We work from facade and interior drawings, reserve and shade-match stone across an elevation so a large wall or facade reads as one material, and cut slabs and panels to a calibrated thickness for safe, flat fixing. For a group, a new-build or a refurbishment across a portfolio, the same stone, format and finish can be repeated for a later phase or a sister property, from the street facade through to the lobby feature walls.
Stone is heavy and the faces and edges are vulnerable in transit, so slabs and panels are crated in purpose-built timber packing that protects them, labelled by elevation for an orderly install. Material ships worldwide FOB or CIF from Istanbul, with the corners, copings and trims supplied together, and we quote each project with Prix direct de l'usine rather than a list rate, typically on a four-to-eight-week lead time depending on volume, stones, formats and fixing. Share the walls, stones and quantities you need, and we will propose stones, prepare samples and cost the package.
Stone Works Range
These engineered surfaces are one part of HFC’s Travaux de pierre range — the same workshops also fabricate the natural marble and stone of a property. Explore the rest of the range, each detailed on its own page:
Surfaces
The Turkish marbles, travertines, onyxes and limestones we quarry — finishes, edges and world equivalents.
Engineered Stone
Quartz, porcelain, solid surface and terrazzo worktops for kitchens and bars.
Flooring
Marble and travertine floor tiles and stone flooring for lobbies and suites.
Bathroom Stone
Vanity tops, washbasins and bathroom stone, made to the suite.
Stone Counters
Natural marble kitchen, bar and reception counters in quarry-direct stone.
PROJECT ENQUIRY
Tell us the property, the walls or facades you need clad and the area, and we will propose stones, prepare samples and quote your project with direct factory pricing — a real, project-based response.
Questions
Marble and natural-stone cladding for interior feature walls and exterior facades, in large-format slabs for a seamless feature wall and thinner stone cladding panels and tiles for facades and textured walls, with split-face and ledgestone options. We supply marble, limestone, travertine, sandstone, slate and granite, with the matching corners, copings and trims, made to project.
Cladding is large-format slabs and fixed stone panels for a feature wall or facade, detailed for vertical fixing. The small-format calibrated wall tiles, shower tiles and mosaics used to tile a bathroom or kitchen wall are a separate product on our marble floor and wall tiles page. We supply both and advise which suits a wall: large-format cladding for a feature, calibrated tiles for a tiled room.
Yes. We supply exterior stone cladding and facades in durable stones selected for weathering, shade-matched across the elevation, with the stone prepared for a mechanical, ventilated facade system rather than adhesive alone at height. We detail the fixings, corners, reveals and copings, and supply limestone, sandstone, travertine and granite for exterior work.
Yes. Marble large-format slabs, book-matched so the veining mirrors across a joint, are our most requested interior feature-wall product, used behind reception desks, in lift lobbies and on feature stairs. For exteriors, marble is reserved for sheltered entrances and protected feature panels, with hardier limestone, sandstone, slate and granite for fully exposed facades.
Large-format slabs for seamless feature walls, thinner cladding panels and tiles for facades and faster fixing, and split-face or ledgestone panels for a rugged, three-dimensional texture, plus matching corner pieces, copings, sills and trims. The right format depends on the wall, the height and whether the fixing is adhesive or a mechanical facade system.
Lower interior walls can be adhesive-fixed, while facades and cladding at height are supplied for a mechanical, ventilated facade system, where panels are fixed back to a frame with a cavity behind. We cut to a calibrated thickness for safe fixing and supply the corners, copings and trims, but the fixing itself is carried out by the project’s installer to the engineer’s design.
Marble for polished interior feature walls, limestone and sandstone for soft, natural facades, slate and granite for darker, harder-wearing exteriors, and travertine for warm texture, which is covered in depth on our travertine page. We advise which stone suits which wall, balancing look against exposure and weathering.
Split-face and ledgestone are textured cladding panels that give a rugged, three-dimensional, layered-stone look, supplied as interlocking strips or panels for a fast, characterful finish in real stone. They suit feature walls and natural facades where texture is wanted rather than a smooth, polished surface.
Stone costs more than a plastic, metal or composite panel, but it does not fade, warp, discolour or need replacing the way manufactured cladding does, and on the surfaces a hotel wants to impress the difference between real stone and an imitation is immediately visible. For hidden or strictly budget walls a manufactured panel may be practical; for the walls that matter, stone is the permanent, premium choice.
Yes. The cladding is cut from the same Turkish quarries as our floors, counters, vanities and tables, so feature walls and facades coordinate with the rest of a property’s stone. A hotel can carry one material story from the facade and feature walls through to the floors, counters and bathrooms, all matched and supplied by one factory.
Slabs and panels are crated in purpose-built timber packing that protects the faces and edges, labelled by elevation for an orderly install, with the corners, copings and trims supplied together. Material is shade-matched and calibrated, and ships worldwide FOB or CIF from Istanbul.
We quote each project with direct factory pricing rather than a list rate, typically on a four-to-eight-week lead time depending on volume, stones, formats and fixing. Made to project, the same stone and finish can be repeated for a later phase or a sister property. Share the walls, stones and quantities you need and we will propose stones, prepare samples and cost the package.
Marble and natural-stone cladding for interior feature walls and exterior facades, in large-format slabs for a seamless feature wall and thinner stone cladding panels and tiles for facades and textured walls, with split-face and ledgestone options. We supply marble, limestone, travertine, sandstone, slate and granite, with the matching corners, copings and trims, made to project.
Cladding is large-format slabs and fixed stone panels for a feature wall or facade, detailed for vertical fixing. The small-format calibrated wall tiles, shower tiles and mosaics used to tile a bathroom or kitchen wall are a separate product on our marble floor and wall tiles page. We supply both and advise which suits a wall: large-format cladding for a feature, calibrated tiles for a tiled room.
Yes. We supply exterior stone cladding and facades in durable stones selected for weathering, shade-matched across the elevation, with the stone prepared for a mechanical, ventilated facade system rather than adhesive alone at height. We detail the fixings, corners, reveals and copings, and supply limestone, sandstone, travertine and granite for exterior work.
Yes. Marble large-format slabs, book-matched so the veining mirrors across a joint, are our most requested interior feature-wall product, used behind reception desks, in lift lobbies and on feature stairs. For exteriors, marble is reserved for sheltered entrances and protected feature panels, with hardier limestone, sandstone, slate and granite for fully exposed facades.
Large-format slabs for seamless feature walls, thinner cladding panels and tiles for facades and faster fixing, and split-face or ledgestone panels for a rugged, three-dimensional texture, plus matching corner pieces, copings, sills and trims. The right format depends on the wall, the height and whether the fixing is adhesive or a mechanical facade system.
Lower interior walls can be adhesive-fixed, while facades and cladding at height are supplied for a mechanical, ventilated facade system, where panels are fixed back to a frame with a cavity behind. We cut to a calibrated thickness for safe fixing and supply the corners, copings and trims, but the fixing itself is carried out by the project’s installer to the engineer’s design.
Marble for polished interior feature walls, limestone and sandstone for soft, natural facades, slate and granite for darker, harder-wearing exteriors, and travertine for warm texture, which is covered in depth on our travertine page. We advise which stone suits which wall, balancing look against exposure and weathering.
Split-face and ledgestone are textured cladding panels that give a rugged, three-dimensional, layered-stone look, supplied as interlocking strips or panels for a fast, characterful finish in real stone. They suit feature walls and natural facades where texture is wanted rather than a smooth, polished surface.
Stone costs more than a plastic, metal or composite panel, but it does not fade, warp, discolour or need replacing the way manufactured cladding does, and on the surfaces a hotel wants to impress the difference between real stone and an imitation is immediately visible. For hidden or strictly budget walls a manufactured panel may be practical; for the walls that matter, stone is the permanent, premium choice.
Yes. The cladding is cut from the same Turkish quarries as our floors, counters, vanities and tables, so feature walls and facades coordinate with the rest of a property’s stone. A hotel can carry one material story from the facade and feature walls through to the floors, counters and bathrooms, all matched and supplied by one factory.
Slabs and panels are crated in purpose-built timber packing that protects the faces and edges, labelled by elevation for an orderly install, with the corners, copings and trims supplied together. Material is shade-matched and calibrated, and ships worldwide FOB or CIF from Istanbul.
We quote each project with direct factory pricing rather than a list rate, typically on a four-to-eight-week lead time depending on volume, stones, formats and fixing. Made to project, the same stone and finish can be repeated for a later phase or a sister property. Share the walls, stones and quantities you need and we will propose stones, prepare samples and cost the package.
hotelfurnitureconcept.com · Turkish marble & natural stone, quarried, fabricated and installed for hotels for 30+ years · dans**@*******************pt.com · FOB / CIF worldwide · Supply or full stone contracting
Produits
Entreprise