Cabinetry / Kitchen Cabinet
Contract and custom kitchen cabinetry, manufactured to project in Istanbul for hotels, aparthotels, villas and residential developments. Carcasses and doors in MDF, plywood, laminate, lacquer and real wood, on engineered hardware, finished to your specification and shipped worldwide.
30+
Nombre d'années de fabrication
FOB / CIF
Livraison partout dans le monde
4–8 semaines
Temps de réalisation des projets
2 ans
Garantie
Vue d'ensemble
A kitchen is the most heavily built part of any interior — more linear metres of cabinetry, more hardware, more moving parts and more daily wear than anywhere else in a room. For a hotel, an aparthotel, a villa or a residential development, that cabinetry is also a quantity decision: the same kitchen, or a small family of kitchens, is built and installed across many units, and it has to be consistent, durable and deliverable on a programme. That is a manufacturing problem, not a retail purchase, and it is what we do.
Nous fabriquons custom kitchen cabinets to your drawings and specification — carcasses, doors, fronts, fillers and internals — in MDF, plywood, laminate, lacquer and real wood, on engineered hinges and runners, finished to the colour and door style the project calls for. The cabinetry is modular in construction so it ships flat or part-assembled and installs cleanly on site, and it is built to a contract standard of carcass, edge and hardware that holds up to commercial use far better than a flat-pack or showroom kitchen.
From a single villa kitchen to a run of identical aparthotel kitchenettes to the kitchens across a residential block, the work is the same: engineer the cabinetry to the layout, the materials and the budget, manufacture it to a repeatable standard, and ship it ready to install. Worktops are specified alongside the cabinetry; for natural stone and marble countertops we draw on our dedicated marble & stone countertops page, cut and finished to the kitchen. Everything is made to project in Istanbul and shipped worldwide.
What ties all of it together is that we are a manufacturer, not a reseller. The cabinetry is engineered, cut, finished and packed under one roof, quoted at direct factory pricing, and backed by a single point of responsibility from the first drawing to the last installed unit — which is what a project needs when the kitchen has to be right across an entire building.
Kitchen Cabinet — At a Glance
MDF / plywood
Lacquer, laminate, melamine, wood
Handleless, shaker, framed
Island, L-shape, galley, U-shape
Soft-close hinges & runners
Laminate, solid surface, stone
Modular, made to measure
4 à 8 semaines
Comment nous travaillons
01
Commerce et contrat uniquement
Nous travaillons avec des hôtels, des promoteurs immobiliers, des studios d’intérieur et des équipes d’approvisionnement — et non avec le public.
02
Confectionné selon votre projet
Chaque pièce est conçue selon vos dessins, vos finitions, vos caractéristiques d’étanchéité et vos quantités. Rien de prêt.
03
Prix selon le projet
Pas de liste de prix ni de boutique en ligne — chaque projet est facturé selon ses caractéristiques, directement de notre usine.
04
Livré partout dans le monde
Nous emballons, expédions et installons les produits sur site dans plus de 40 pays, selon un calendrier unique ou en plusieurs phases.
The Difference
Most of what is sold as a kitchen cabinet is consumer product: flat-pack and ready-to-assemble units, showroom kitchens specified one at a time, or units bought to be painted and refaced at home. They are built to a price for a single domestic kitchen used by one family, and they are not engineered for the demands of a project — the repeatability across many units, the durability under guest or tenant use, the moisture of a kitchen used hard, and the logistics of delivering and installing dozens of kitchens to a programme.
Contract cabinetry is a different specification at every level. The carcasse is moisture-resistant board, properly edge-banded on all exposed edges so it does not swell or chip; the doors and fronts are finished to resist knocks, cleaning and humidity; the matériel informatique is rated for tens of thousands of open-close cycles rather than a domestic handful; and the whole kitchen is engineered to be built the same way every time so the hundredth unit matches the first. For a buyer furnishing a building rather than a home, that consistency and durability is the entire point — it is the difference between a kitchen that still looks specified after five years of use and one that has to be replaced.
The cost logic follows from that. A contract kitchen looks more expensive than a flat-pack on a line-by-line comparison, but the comparison that matters to a project is cost over the life of the building. A kitchen that survives a decade of guest or tenant use without doors dropping, edges swelling or runners failing is far cheaper than one bought on price and replaced twice in the same period, with the disruption and lost revenue each replacement brings to an occupied building. For a developer or an operator, specifying a durable, consistent, repairable kitchen is a maintenance and lifecycle decision as much as a furnishing one — which is precisely why it is bought from a manufacturer, to a specification, rather than off a showroom floor.
Specify
A kitchen is built from a set of choices — material, layout, door style, worktop and storage. Select each to see how we specify it for a project.
The carcass is moisture-resistant MDF or plywood, edge-banded on exposed edges. Doors and fronts run from lacquered MDF and high-gloss or matt laminate to melamine and real wood veneer or solid timber, chosen for look, durability and budget.
Options
· Lacquered MDF — matt or gloss
· Laminate & melamine fronts
· Real wood veneer & solid timber
· Plywood carcass for wet areas
Matériaux
More than anything else, the material decides how a kitchen looks, how much it costs and how long it lasts, and a contract specification usually mixes materials by where they are used: a robust, moisture-resistant board for the carcass, and a door material chosen for finish and durability. We build in the full range so the kitchen is specified to the project rather than forced into one construction.
MDF and lacquered MDF are the workhorse of the modern kitchen. MDF machines to a perfectly smooth, dense surface that takes a sprayed lacquer beautifully, giving a seamless matt or high-gloss door in any colour with no visible grain or joint — the clean, contemporary look most projects want. Panneau de contreplaqué is specified where moisture and strength matter most, for carcasses in wet zones and for cabinetry that has to carry weight, because it resists swelling far better than chipboard. Lambris et mélamine fronts give a hard, scratch- and stain-resistant surface at a sensible cost — the practical choice for high-turnover aparthotel and rental kitchens where the finish has to survive heavy, careless use. And real wood — veneer over a stable core, or solid timber for framed and shaker doors — gives the warmth and grain that a villa or a premium residential kitchen calls for.
For a B2B buyer, the material choice is also a durability and cost-control decision across many units. We help specify the right construction for the use — laminate doors and MDF carcasses for a serviced-apartment block where toughness and budget lead, lacquered or timber doors for a villa or signature residence where the finish leads — and we build whichever combination to the same engineered carcass and hardware standard underneath, so the quality of the cabinet does not change with the look of the door.
There is also a quiet reason MDF and laminate dominate contract kitchens that has nothing to do with looks: they are dimensionally stable and predictable to machine, so a thousand doors come off identical and flat, and they hold a finish without the movement, splitting and seasonal swelling that solid timber can bring in a humid or air-conditioned building. For a project that needs every unit to match and to stay matched, that consistency is worth as much as the finish itself. Where a project specifically wants the character of timber, we use it knowingly — veneer over a stable core to get the grain without the movement, or solid timber in framed and shaker doors where that look is the point — and we condition and finish it to behave in the climate it is shipping to.
Style
The door style and colour are what a kitchen is judged on, because the doors and fronts are almost all of what is seen. We manufacture the full range of styles so the cabinetry reads as part of the interior scheme rather than a stock kitchen dropped into the room.
Handleless doors — with a J-pull profile or push-to-open mechanism — give the clean, uninterrupted fronts that define contemporary kitchens, and they suit hospitality and rental units where protruding handles are a snagging and cleaning problem. Shaker and framed doors give the timeless, classic look for villas and traditional residential schemes. Flat slab doors are the simplest and most cost-effective, ideal at volume. Across all of these, the colour and finish are open: a powder-matt white that hides marks, the deep greens and blues that have become signature kitchen colours, warm wood tones, or a high-gloss lacquer — matched to the project’s palette and applied consistently across every unit. Kitchen cabinet fronts can also be supplied on their own to a specifier’s own carcasses where that suits the contract.
Colour is where a kitchen either belongs to the interior or fights it, so we treat it as part of the scheme rather than a catalogue pick. Doors are colour-matched to the project’s palette and applied consistently across every unit, with the same colour holding from the first kitchen to the last; two-tone schemes — a darker base and lighter wall units, or a contrasting island — are specified where the design calls for it; and the door style, the handle detail and the plinth and cornice are coordinated so the cabinetry reads as a designed kitchen, not an assembly of stock parts. The aim is simple: a kitchen that looks specified for the room it is in, repeated faithfully across however many rooms the project has.
Mise en page
Because we manufacture to the floor plan, the layout is engineered to the room rather than assembled from fixed-size stock units. That matters most at the two extremes — the large kitchen built around an island, and the compact kitchen where every centimetre is fought for.
Un island layout turns the kitchen into a social and working centrepiece, with the island carrying storage, a sink or hob, and seating, and it is the layout most villas and premium residences ask for. L-shape and U-shape layouts give the worktop and storage of a full family kitchen against two or three walls. Galley and single-wall runs pack a complete, usable kitchen into a tight footprint — the layout that makes a serviced-apartment or studio kitchenette work, covered in depth on our appartements et cuisines compactes page. Whatever the layout, the cabinetry is built to the exact run length and the appliances, so there are no awkward fillers or wasted space.
Stockage
A kitchen is only as good as its storage, and the internals are where a well-made kitchen earns its keep day to day. We specify the storage into the cabinetry so it works for the way the unit is actually used, rather than leaving empty boxes for someone else to fit out.
Tall pantry and larder units give a compact kitchen its bulk storage in a small footprint; internal and pan drawers on soft-close runners make base units genuinely usable; Solutions d'angle reclaim the dead space that wastes a fifth of many kitchens; and integrated bins, appliance housings and services voids are designed in around the fridge, oven, hob and sink the project has chosen. For hospitality and rental kitchens, robust, simple, low-maintenance internals that survive heavy use matter more than gadgetry, and we specify accordingly — the storage that works and lasts, not the storage that impresses in a showroom and breaks in a year.
Integration
A kitchen is built around its appliances, not the other way round, so the cabinetry is engineered to the equipment the project has chosen. Ovens, hobs, fridges, dishwashers, microwaves and extraction are housed in correctly sized, ventilated units; sinks and taps are set into the worktop with the plumbing run designed into the carcass; and the gaps, fillers and end panels are worked out so the finished run is tight and clean with no improvised cuts on site.
For hospitality and rental kitchens the appliance brief is usually about robustness and simplicity — an induction hob that is easy to clean and hard to damage, an integrated fridge that disappears behind a matching door, a single durable sink — and the cabinetry is specified to suit. Where appliances are integrated behind cabinet doors for a seamless look, the housings, hinges and ventilation are designed for that appliance so it runs cool and the door sits flush.
Services voids for power, water and waste are built into the cabinetry, and where a project supplies its own appliances we build to their dimensions; where it does not, we advise on the housings to specify. The result is a kitchen that installs as a coordinated unit rather than a set of boxes the fitter has to make fit.
Qualité
The parts of a kitchen that decide whether it survives a project are the ones nobody sees in a photograph: the carcass board, the edge banding, the hinges and the runners. These are where a contract kitchen is made or lost, and they are specified to a standard a domestic flat-pack does not reach.
Le carcasse is moisture-resistant board, cut on CNC for square, accurate units, and edge-banded on every exposed edge with a matching tape that is fused, not just glued, so edges do not lift, chip or absorb water at the most-handled points of the kitchen. Hinges and drawer runners are quality soft-close hardware rated for tens of thousands of cycles, because in a hotel or rental kitchen a cabinet door is opened many times more often than in a home, and cheap hardware is the first thing to fail. Backs, fixings and adjustable feet are specified for a solid, level install, and the whole carcass is engineered to be built identically every time. It is unglamorous detail, but it is exactly what separates a kitchen that is still tight and quiet after years of use from one that sags, sticks and rattles.
Normes
Behind the finish, the board itself is specified to a standard, because a kitchen lives in the most demanding environment in any interior — heat, steam, water and constant cleaning. We build carcasses and doors in low-emission boards to recognised formaldehyde standards, which matters in a guest room or a residence where the kitchen shares the air people live in, and to moisture-resistant grades where the kitchen is used hard, so the board around the sink, the dishwasher and the kettle does not swell, soften or delaminate over time.
For humid and coastal climates, this specification matters even more, and we build accordingly — moisture-resistant board throughout, fully sealed edges, and plywood carcasses in the wettest zones — so a kitchen shipped to a seafront resort behaves the same as one in a temperate city. Surfaces are specified to be hard-wearing and easy to clean for hygiene, fronts and edges to resist the knocks of heavy use, and finishes to hold their colour against daily wiping and sunlight. Where a project carries specific contract requirements — emission grades, fire performance for a particular setting, or a documented specification for a developer or an architect — we build and document to them. It is the unglamorous half of the specification, and on a project it is exactly the half that gets audited.
Qui nous fournissons
The same contract standard is specified differently for each kind of project, and we build for the full range of buyers furnishing kitchens at quantity rather than one at a time.
Appartements-hôtels et appartements meublés
Compact, durable kitchenettes built identically across many units — our specialist field.
Villas & Premium Residences
Island and L-shape kitchens in lacquer or real wood, finished to a high standard for resort villas and signature homes.
Residential Developments
One repeatable kitchen, or a small family of kitchens, manufactured consistently across an apartment block or housing scheme.
Hotels & Staff Kitchens
Pantry, back-of-house and staff-accommodation kitchens built to the same engineered standard as the front-of-house.
Comparez
| Door material | Regardez | Le meilleur pour | Force |
|---|---|---|---|
| Lacquered MDF | Seamless matt or gloss, any colour | Contemporary villa & residential | Premium finish |
| Laminate / melamine | Hard, even surface | Aparthotel & rental, high-turnover | Toughness & cost |
| Real wood / veneer | Natural grain and warmth | Villa, shaker, premium homes | Personnage |
| Plywood carcass | Structural, not seen | Wet zones, load-bearing units | Résistance à l'humidité |
Most projects mix these — a moisture-resistant carcass with the door material the look and budget call for. We specify the combination to the use and build it all to one engineered standard underneath, so the cabinet quality stays constant whichever door is chosen.
The Process
Furnishing kitchens at quantity is a process, and a clear one keeps a project on budget and on programme. It starts with the brief and the drawings — the floor plans, the unit schedule, the appliances, the look and the budget — from which we engineer the cabinetry and return a specification and quotation across carcass, doors, worktops, hardware and internals. Nothing is cut until the drawings and a sample finish are approved, so the specifier sees and signs off exactly what will be built before manufacture begins.
Once approved, the kitchen is manufactured to that standard and, where it repeats, built identically across every unit. It ships modular and flat or part-assembled, labelled and packed for the install sequence, so the local fitter is assembling a coordinated kit rather than solving problems on site. For a multi-site or phased rollout — an aparthotel brand adding properties, a developer building out a scheme in stages — locking one engineered kitchen design means later phases match the first exactly and the spares stay interchangeable across the whole estate. One drawing set, one standard, one point of responsibility, from the first quotation to the last unit installed: that is what a project buyer is really buying when they choose a manufacturer over a supplier.
From Project to Install
A kitchen programme starts with the drawings. We work from the floor plans, the unit schedule, the appliances and the look the project calls for, engineer the cabinetry to suit, and return a specification across carcass, doors, worktops, hardware and internals. Where a project repeats a kitchen across many units, we lock one design and build it identically, so every unit matches and the spares are interchangeable.
Production generally falls within a four to eight week window depending on quantity, material and finish. Cabinetry ships worldwide on an FOB or CIF basis, modular and flat or part-assembled for efficient transport and a clean site install, with clear drawings and the hardware supplied as a coordinated package; we work with the project’s local installer for fitting. A two-year warranty covers the cabinetry, and direct factory pricing is provided on enquiry. Buying direct from the manufacturer in Istanbul removes a layer of cost and a layer of risk — one factory, one engineered standard, and a single point of responsibility from drawing to delivery.
Nos catégories de produits
HFC manufactures across fifteen contract furniture categories — all with direct factory pricing, custom specification and shipping to 40+ countries. Explore the rest of the range:
Chambres d'hôtes
Meubles de chambre d'hôtel
Lit, armoires, tables de chevet, tables de nuit et accessoires
Zones publiques
Meubles de lobby d'hôtel
Reception desks, lobby seating, lounge furniture
Gastronomie
Hotel Restaurant Furniture
Restaurant chairs, dining tables, bar stools, booth seating
Événements et banquets
Meubles de banquets
Aluminium banquet chairs, round tables, conference furniture
En plein air
Meubles d'extérieur
Chaises longues, mobilier de terrasse et mobilier de jardin pour les hôtels
Chambres d'hôtes
Assiettes pour la salle à manger
Chaises longues, canapés-lits, canapés et sièges d'appoint pour les chambres
Stone
Usines de marbre
Superpositions en marbre et pierre naturelle, vanités, revêtements et planchers
Métal
Métal Works
Fabrication sur mesure en acier inoxydable et acier, montages et métallurgie architecturale
FF&E
FF&E Supply Solutions
Achats et approvisionnement complets des biens immobiliers et des équipements, coordonnés depuis une seule usine
Demander un devis
Tell us the project type, the number of kitchens and your material and finish in mind, and we will prepare a specification and direct factory pricing — a real, project-based response, not a generic price list.
Questions
Nous fabriquons des meubles sur-mesure selon vos dessins — carcasses, portes, façades et intérieurs construits selon le plan précis, la longueur et les appareils du projet. La construction est modulaire pour un transport efficace et une installation propre, mais la cuisine elle-même est conçue pour s’adapter à la pièce plutôt que de se fabriquer à partir de dimensions standard.
Les carcasses sont fabriquées en MDF ou en contreplaqué résistant à l’humidité, tandis que les portes et les façades sont en MDF laqué, en stratifié haute ou basse brillance, en mélamine, en véritable bois ou en bois massif. Nous combinons les matériaux selon les besoins — une carcasse robuste avec le matériau de la porte qui correspond à l’apparence et aux contraintes budgétaires — et construisons toutes les combinaisons selon les mêmes normes techniques en matière de carcasse et d’armatures sous-jacentes.
Le MDF laqué donne une porte mate ou brillante sans grain et sans grain de grain de toutes les couleurs — un look contemporain et épuré. Les panneaux stratifiés et les mélaminés donnent une face dure, peu coûteuse et résistante aux rayures pour les cuisines à forte circulation. Le bois véritable, sous forme de placage ou de bois massif, procure un grain naturel et une chaleur chaleureuse pour les villas et les résidences de luxe. La bonne solution dépend de l’apparence, du budget et de l’utilisation que l’on souhaite faire de la cuisine.
Oui. Les plan de travail sont disponibles avec des meubles de rangement en stratifié, compacts et en surface solide, ainsi que en pierre naturelle et marbre, selon les souhaits du projet. Les plan de travail en pierre et marbre sont issus de notre gamme de marbres dédiée, taillés et finis selon les spécifications de la cuisine, de sorte que le mobilier et la surface soient conçus en une seule et même spécification.
Oui — c’est le cœur même de la fabrication contractuelle. Pour un hôtel d’appartements, un projet résidentiel ou tout autre projet nécessitant la réutilisation d’une cuisine, nous développons une seule conception et la fabriquons de manière identique dans toutes les unités, de sorte que la centième cuisine corresponde à la première et que les pièces détachées soient interchangeables. La cohérence dans la quantité est précisément ce qui distingue un fabricant de projets d’un showroom.
Les charnières et les rails de tiroir souples de haute qualité sont certifiés pour des milliers de cycles d’ouverture et de fermeture, car dans une cuisine d’hôtel ou de location, un meuble est utilisé bien plus souvent que dans un domicile. Les carcasses sont en panneau résistant à l’humidité, avec des bordures sur chaque bord exposé pour éviter que les bords ne remontent ou absorbent l’eau. Les pieds réglables permettent une installation stable et solide. Les éléments de fixation et le panneau sont les éléments qui permettent à un meuble sur mesure de durer plus longtemps que les meubles préfabriqués.
Yes. Lacquer and laminate doors are colour-matched to a RAL or NCS reference or a supplied sample, and a single approved kitchen design — layout, materials, door style and colour — is replicated identically across every unit in a project. That repeatability is the core of contract manufacturing: the design is locked once and built the same way for the hundredth kitchen as the first.
Yes. Carcasses and doors are built in moisture-resistant board to recognised low-emission standards, with fully sealed edges, and plywood carcasses are specified in the wettest zones. For humid and coastal projects we build with moisture resistance throughout so a kitchen shipped to a seafront resort behaves the same as one in a temperate city. Where a project carries specific emission or fire requirements, we build and document to them.
We manufacture to project in Istanbul and ship worldwide FOB or CIF, modular and flat or part-assembled for efficient transport, with clear drawings and the hardware supplied as a coordinated package. Fitting is carried out with the project’s local installer or contractor. For multi-unit projects, one engineered standard keeps every kitchen consistent across the building.
Production generally falls within a four to eight week window depending on quantity, material and finish. We quote each project from the floor plans, unit schedule and specification with direct factory pricing rather than a list price, ship worldwide FOB or CIF from Istanbul, and provide drawings to approve before manufacture. Talk to us about your project for a quotation.
Hotel Furniture Concept (HFC) — contract kitchen cabinet manufacturer, Istanbul, Türkiye · dans**@*******************pt.com · Plus de 30 ans · Livraison franco-camerounaise / CIF à travers le monde · Garantie de 2 ans
Produits
Entreprise